SORRY, NO Personal checks, but
payments may be made with 
| For The Best CAD / CAM Service in the White Mountain Region... |
|||||
|
|||||
| LOW Cost: Retired Mechanical Engineer and Computer Programmer with 12 years of CNC programming experience. I work from home, so how does $48 an hour (Minimum 4-hours) sound for my basic programming rate? |
|||||
| CNC PROGRAMMING - CAD Drafting | |||||
| Drawing and programming jobs... I can produce Computer Assisted Drawings (CAD) in AutoCAD formats from AutoCAD version 2.5 through R2000, preferably versions 10 and/or version 12. I can generate basic and extended G-Code from my CAD files in DXF format or your supplied CAD files in DXF format. All CAD generation work is charged at $48 per hour (Minimum 4-hours). EMail Peter for more information. |
|||||
| If you want to supply the G-Code files to us then these are the G and M Codes our CNC machines support... |
| G-CODES | DESCRIPTION | |
| G04 P1000 G28 G30 G31 G32 G40 G41 G42 G43 H Z G44 H Z G49 G50 G51 X Y Z G53 G54 - G59 G74 X Y Z R F G75 G77 X Y1 Y2 F G78 X1 X2 X3 Y1 Y2 F1 F2 G79 R F G80 G81 X Y Z R F G82 X Y Z R P F G83 X Y Z R Q F G84 X Y Z R F G85 X Y Z R F G87 X Y Z1 Z2 R Q G89 X Y Z R P G90 G91 |
Dwell for 1 second Move to machine zero Cancel mirror image Mirror image on X Mirror image on Y Cancel cutter compensation Cutter compensation to LEFT of material Cutter compensation to RIGHT of material PLUS Tool length comp H=Offset# Z=Tool offset MINUS Tool length comp H=Offset# Z=Tool offset Cancel tool length compensation Cancel Scaling Scale axis X Y Z Cancels work coordinate system G54 through G59 Work coordinate systems Tap LH Z=Depth R=Rapid plane Allow multiple quadrant circles Canned PAD X=Length Y1=Width Y2=y-step-over Canned POCKET Internal hole R=Radius Cancel canned cycle Drill Z=Depth R=Rapid plane Counter bore Peck drill Z=Depth R=Rapid plane Q=Peck Tap RH Z=Depth R=Rapid plane Bore IN bore OUT R=Rapid plane Drill chip break Bore with dwell Absolute - MUST APPEAR ON IT'S OWN LINE Incremental - MUST APPEAR ON IT'S OWN LINE |
|
| LOOPING | DESCRIPTION | |
| =N1000/4 | Loop 4 times until N1000 is reached | |
| M-CODES | DESCRIPTION | |
| M00 M01 M02 M03 M04 M05 M06 M08 M09 M10 M11 M25 M26 M30 M91 X/Y/Z M92 X/Y/Z M93 X/Y/Z M94 /1/2/3 M95 /1/2/3 M98 P M99 M106 M107 M108 M109 |
Stop everything Stop everything End of program - Return to start Spindle ON CW ex. S2100 M03 = 2100rpm, and turn on CW Spindle ON CCW ex. S2100 M03 = 2100rpm, and turn on CCW Spindle OFF Tool change Coolant ON Coolant OFF AUX output ON (not used) AUX output OFF (not used) Home Z-axis Set Z-axis Home to current position End of program - Stop and return to start Move to axis MINUS limit Move to axis PLUS limit Release axis-motor power Turn ON relays 1, 2, 3 (not used) Turn OFF relays 1, 2, 3 (not used) Sub-program M98 P1000 = Jump to sub at o1000 End of sub-program MUST USE on next line to Cancel the following Pauses Pause for Switch MODAL Pause for Dwell time MODAL - See also G04 Pause for Operator MODAL - ex. M109 M03 Spindle ON |
|
| TOOLS | DESCRIPTION | |
| T D T00 T01 = 3/8" T02 = 1/2" T03 = 3/4" T04 = 1/4" T05 = 1/8" T06 = T07 = 1" T08 = T09 = T10 = 1/4" |
T=Tool number D=Offset Cancel Tool Currently assigned tool diameters |
|
|
SORRY, NO Personal checks, but |